Black and Decker Jigsaw 7571 Type 1 Adjust Plate
Power Cord
Part Number: 330072-98
In Stock, 25+ available
This cord is a genuine DeWalt replacement part. This cord is compatible with the list of models below. This part is made for double insulated tools It is a two wire cord with two prongs and does not need a ground wire. The cord is sold individually. Installation of this part requires the new cord wires to go correctly into wire terminals also routing the cord and wires in the right path can help avoid pinching when the tool case (Plate) is put back into place.
Cord Protector
Part Number: 330005-01
In Stock, 25+ available
This cord protector is a genuine DeWalt replacement part and is sold individually.
Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.
Lock Screw
Part Number: 330045-05
In Stock, 25+ available
This is a genuine OEM sourced replacement part designed for use with a variety of power tools. This is a standard hardware which has multiple applications based on your tool. For proper use please refer to diagrams. This is a metal torx T20 metal screw which is sold individually.
Charger
Part Number: 90592363-01
In Stock, 25+ available
This is a genuine OEM replacement part, it is sold individually.
This Charger is used on the tools listed below.
When a battery is inserted into the Charger, the red indicator light will come on indicating that there is contact between the battery and the Charger.
The light will stay on as long as the battery is in the Charger and the Charger is plugged into a working outlet.
Blade Clamp
Part Number: 582593-00
In Stock, 25+ available
This is an OEM replacement part, sold individually.
This Blade Clamp is a tool less blade clamp system. There are no tools needed to clamp the blade into the tool. It is secured to the shaft assembly by two hex head screws. To use this blade clamp, just press up on the black lever insert the blade and it is locked in the clamp.
It is compatible with the Jigsaws listed below.
Carbon Brush
Part Number: 445861-25
In Stock, 25+ available
Genuine OEM replacement
This brush is sold individually, 2 are needed for this tool
It is always best to replace both brushes, even if only one is worn.
Worn brushes frequently are the cause behind a motor running poorly.
Replacing brushes can fix a motor that's operating intermittently.
New brushes can restore a motor's electric braking.
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
There are over 120 tool that use this brush.
Black and Decker Jigsaw 7571 Type 1 Adjust Plate
Source: https://www.ereplacementparts.com/black-and-decker-jigsaw-parts-c-4167_4262.html